SFMKD.com
Home     News     Write comment     About     Forums     Facebook     Twitter     FITB Program     
Category    Subcategory    Order by Advanced Search
View Product
Home > Miscellaneous > 1/350+ > Galaxy Quest N.S.E.A. Protector

Product image

Enlarge Image
Galaxy Quest N.S.E.A. Protector

Visit website
Category: Miscellaneous
Subcategory: 1/350+

E-mail to a friend
Manufacturer:Pegasus Hobbies
Medium: ABS plastic
Parts: 40
Status: Available
Release Date: 2010
Skill Level: Beginner
Since the movie “Galaxy Quest” was released, folks have been waiting for models. Now the wait is over because Pegasus Hobbies has released two models from the series – the N.S.E.A. Protector and a kit with an Ion Nebulizer and a VOX Communicator.

The ship is listed as being 1:1400 scale. A single sheet of decals is included, featuring markings for one ship only, the Protector (NTE-3120). The instruction sheet is fairly simple, with nine steps to complete the building. One nice addition is a two-page section with paint color and decal location call-outs.

The kit has 41 parts and appears to be cleanly molded with ejector marks or flash. There is a lot of detail in the form of finely engraved panel lines. The parts are molded in light gray ABS plastic for the major components. There is also a sprue of clear blue parts for the engine gratings. A very nice Galaxy Quest logo base is included in the box.

The Command Ship, which the crew crashes in the ending sections of the movie, is removable from the remainder of the ship. Pegasus has included four magnets to hold the Command Ship in place, but the instructions do not indicate where the magnets are supposed to be installed. It appears that they would become part of the model in Step 1 when the hull is assembled (recessed plate that goes on the top of the hull), and in Step 9 when the Command Ship is built (the bottom section of the two-part Command Ship).

It also looks like there are ways to light the kit if desired. The most-difficult part appears to be running wire up through the pylons and into the engine sections. The two-part pylon assembly (upper and lower halves) are fairly thin, and there might not be a lot of wiggle room available to run the wires. There really isn’t an interior framework on these parts, so very thin wire would be needed to reach the bulbs in the engines. Lighting the Command Ship might also be difficult unless you decide to permanently attach it to the rest of the hull.

Pegasus indicates in the instructions that Tamiya Extra Thin Cement, Model Master Liquid Cement for Plastic Models, or super glue can be used to join the ABS parts. There is a warning right on the instructions that “methyl ethyl keytone-based glues will not work to join the parts as those glues do not react with ABS plastic.

One confusing thing is that Pegasus didn’t include part numbers for the major components. Part numbers are only provided for the clear blue parts and for some of the smaller parts. There aren’t any locator numbers on the sprues or on the parts themselves.

I’m looking forward to building this kit, and I’m glad that one has finally come out. If you’re a Galaxy Quest fan, you better get this kit before it’s gone.

And remember . . . .

Never give up, never surrender!

Instruction sheet
Decals
Main hull sections
Engineering
Stand

Review by: Rich "Lonewolf" Dula

Entry Created: February 20, 2010
Comments: 0 | Rating (1-5): -- No rating -- | MSRP: $29.99

Product Comments
Write a comment
There are currently no comments for this product.

 

Site Headlines
Mon 30th May 2016, 03:20:17
The joys of "real life" and our hobby.
Thu 07th Apr 2016, 02:02:06
Website Clarification
Fri 01st Jan 2016, 18:09:49
Starting 2016 With New Kit Reviews!
Fri 01st Jan 2016, 06:16:31
The Delta Quadrant Receives C&D
Wed 26th Aug 2015, 02:18:35
ALERT!! ONE OF OUR OWN IS PASSING AND HIS FAMILY NEEDS OUR HELP!
View more...


Contact | Site map | Resources | Terms of service | Privacy policy
Copyright © 2009 SFMKD.com All rights reserved.