SFMKD.com
Home     News     Write comment     About     Forums     Facebook     Twitter     FITB Program     
Category    Subcategory    Order by Advanced Search
View Product
Home > Miscellaneous > 1/1 > Galaxy Quest Ion Nebulizer and VOX

Product image

Enlarge Image
Galaxy Quest Ion Nebulizer and VOX

Visit website
Category: Miscellaneous
Subcategory: 1/1

E-mail to a friend
Manufacturer:Pegasus Hobbies
Medium: ABS plastic
Parts: 30
Status: Available
Release Date: 2010
Skill Level: Beginner
Since the movie ďGalaxy QuestĒ was released, folks have been waiting for models. Now the wait is over because Pegasus Hobbies has released two models from the series Ė one with a 1:1 scale Ion Nebulizer and a VOX Communicator, and a second of the N.E.S.A. Protector.

This kit is listed as being 1:1 scale, made from the props in the movie. A single sheet of decals is included, and includes one decal Ė the VOX screen. The instruction sheet is fairly simple, with four steps to complete each item. One nice addition is a two-page section with paint color call-outs.

The kit has 30 parts and appears to be cleanly molded with ejector marks or flash. There is a lot of detail in the form of finely engraved panel lines. The parts are molded in light gray ABS plastic for the major components. There is also a sprue of clear blue parts for the nebulizer. A small bag of screws and springs (for the nebulizer trigger and the VOX flip-open cover) is also included.

The nebulizer, with 17 parts, is pretty simple. The stock halves screw together with the spring-loaded trigger sandwiched between them. A nice feature is that the screws are eventually hidden beneath checkered grips. After the stock and grips are completed, the main body of the nebulizer is snapped around them, and held into place by a square-shaped peg with a lip around it. Once the body halves are snapped or glued together, you wonít be able to take them apart again without a fair amount of trouble. There is definitely a way to light the kit, as there is a lot of space inside the main nebulizer body, but the question is exactly where can you put the batteries so you can replace them when needed? Thatís something that someone else will have to figure out.

The VOX has 13 parts and is pretty simple. The microphone portion swings down into place, and a belt clip is included so you can always have your communications device handy. There isnít a lot of detail on the VOX, and the trademark information is molded into the back side of it (looks like some sanding needs to be done before construction starts). Lighting is possible, as there is a bit of space inside the VOX body, and the rear plate can be made to be easily removed. Some modification would need to be done to remove the solid-molded circular section where the decal will be placed, but that area could probably be replaced with some clear acetate to allow the decal to be backlit.

Pegasus indicates in the instructions that Tamiya Extra Thin Cement, Model Master Liquid Cement for Plastic Models, or super glue can be used to join the ABS parts. There is a warning right on the instructions that ďmethyl ethyl keytone-based glues will not work to join the parts as those glues do not react with ABS plastic.

One confusing thing is that Pegasus didnít include part numbers for anything. There arenít any locator numbers on the sprues or on the parts themselves. Itís pretty easy to figure out which part goes where, but itís been a while since Iíve seen instructions without part numbers.

Iím looking forward to building this kit, and Iím glad that one has finally come out. If youíre a Galaxy Quest fan, you better get this kit before itís gone.

And remember . . . .

Never give up, never surrender!

Handgrips for Ion Nebulizer
Upper - VOX parts. Lower - Ion Nebulizer parts
This gives you an idea of teh size of the VOX

Review by: Rich "Lonewolf" Dula

Entry created: February 20, 2010
Comments: 0 | Rating (1-5): -- No rating -- | MSRP: $17.99

Product Comments
Write a comment
There are currently no comments for this product.

 

Site Headlines
Sun 29th May 2016, 20:20:17
The joys of "real life" and our hobby.
Wed 06th Apr 2016, 19:02:06
Website Clarification
Fri 01st Jan 2016, 11:09:49
Starting 2016 With New Kit Reviews!
Thu 31st Dec 2015, 23:16:31
The Delta Quadrant Receives C&D
Tue 25th Aug 2015, 19:18:35
ALERT!! ONE OF OUR OWN IS PASSING AND HIS FAMILY NEEDS OUR HELP!
View more...


Contact | Site map | Resources | Terms of service | Privacy policy
Copyright © 2009 SFMKD.com All rights reserved.